Removing lock cylinder — AUDI

🧭 Before you start

Fits: platform codes 2DA, 2DB, 2DC, 2DD, 2DE, 2DF, 2DG, 2DH, 2DK, 2DL, 2DM

📋 Procedure

1. Remove steering column switch .
2. Remove relay plate with fuse carrier .
3. Disconnect immobiliser reader coil D2 at lock cylinder .
4. Remove steering column Running gear48Assembly overview - steering column and steering wheel.
5. Remove steering lock housing

6. Remove ignition/starter switch .
7. Insert ignition key in lock cylinder and turn to position (2)"„Drive“".
8. Pull steering lock (2) out of steering lock housing (1).
9. Turn ignition key to "„Drive“" position again.
10. Turn protective dust cap (1) of lock cylinder in direction of (arrow A) and release.
11. Pull lock cylinder (1) out of steering lock housing (2).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing toothed belt, vehicles 01.06 ►
• Installing gearbox, four-wheel drive
• Installing gearbox, vehicles with all-wheel drive as of model year 2010
• Removing and installing coolant pipe (right-side) – Audi · 1 torque figures
• Installing gearbox - vehicles with 1.9 ltr. TDI engine – Audi