Removing, installing and adjusting cable for regulating valve — AUDI

🧭 Before you start

Fits: platform code 2DA

Don't miss

• The sheath (2) of cable must contact stop (arrow).
• Ensure that positions "“cold”" and "“warm”" can be reached on regulating valve by turning rotary temperature knob.

📋 Procedure

1. Remove heater unit .
2. Loosen clip (1).
3. Swing cable (2) upwards (arrow) and unhook it.
4. Loosen clip (3).
5. Unclip cable (2) from lever (1) for regulating valve.

6. Attach blue cable for regulating valve to controls for fresh and heated air. [Note: The sheath (2) of cable must contact stop (arrow).]
7. Press in clip (1).
8. Turn rotary temperature knob to "“cold”" stop.
9. Hold lever (1) against stop.
10. Clip in core end.
11. Secure cable (2) with clip (3).
12. Ensure that positions "“cold”" and "“warm”" can be reached on regulating valve by turning rotary temperature knob.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures