Removing gearbox mounting - vehicles with 2.0 ltr. TDI engine — AUDI

🧭 Before you start

Fits: Audi TT Mk2 (8J, 2006–2014)

Don't miss

• Take up weight of engine evenly with spindles; do not lift.

📋 Procedure

1. Remove air cleaner housing 23Air cleaner; Exploded view - air cleaner housing.
2. Remove bolts (arrows) and detach bracket for air cleaner housing.
3. Press release tabs and disconnect crankcase breather hose (1) from cylinder head cover.
4. Move clear vacuum hoses (arrows) at air pipe.
5. Release hose clip (2) and detach air pipe.

6. Set up support bracket10 - 222 A on wing mounting flanges.
7. Attach hooks of spindles 10 - 222 A /11 to engine lifting eyes.
8. Take up weight of engine evenly with spindles; do not lift.
9. Remove bolts (arrows).
10. Take electrical connector (1) out of bracket.
11. Open retainers for wiring duct (arrows), unclip electrical wiring using removal lever80 - 200 and press electrical wiring to the side.
12. Unclip wiring duct.
13. Remove bolts (1) and detach gearbox mounting (A).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing backrest (left/right) – Audi Q7
• Removing and installing radioR, MMI (up to week 21/09) – Audi
• Removing and installing navigation system with CD drive control unit J401 (MMI)
• Removing and installing bracket for navigation system with CD drive control unit J401
• Renewing 12 V socket 5U26 – Audi Q7