Removing front seat in event of defective seat longitudinal adjustment motor or control unit — AUDI

🧭 Before you start

Fits: Audi A4 B6/B7 (8E)

📋 Procedure

1. Remove bolts (3) (2x).
2. Fold seat forwards.
3. Remove bolts (1) (4x).
4. Take out backrest with upper seat pan frame.
5. Unplug connector at seat longitudinal adjustment motor.

6. Use external power source to move seat longitudinal adjustment motor until bolts become visible.
7. Remove bolts.
8. Remove control unit .
9. Unplug connector (3).
10. Unscrew bolts (4) (2x) at seat longitudinal adjustment motor.
11. Disengage seat longitudinal adjustment motor (2) from shafts (1) and (5).
12. Move both seat rails with a battery-operated screwdriver and long shaft (5) until concealed bolts become visible.
13. Remove bolts.
14. Renew seat base frame with seat longitudinal adjustment motor.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Servicing inner constant velocity joint – Audi
• Removing and installing power steering pump (vehicles with 6-cyl. petrol engine) (FSI)
• Removing and installing selector mechanism (vehicles from VIN 8E_6A156500 onwards)
• Removing and installing selector lever cable (vehicles from VIN 8E_6A156500 onwards)
• Disconnecting and connecting second battery A1 · 2 torque figures