Removing and installing window lifter: Audi A4 Cabriolet B6/B7
Step-by-step removing and installing window lifter for the Audi A4 Cabriolet B6/B7: 13 steps. What to remove, in what order, and what to check after.
Workshop procedure for AUDI — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: Audi A4 Cabriolet B6/B7 (8H)
Don't miss
- Mark the positions of the bolts and nuts.
📋 Procedure
- Remove the door trim 70.
- Mark the positions of the bolts and nuts.
- Completely close the window.
- Remove the window .
- Remove window lifter motor .
- Remove the bass loudspeakers.
- Remove the rear view mirror .
- Unscrew the nuts (1), (3) and (4).
- Unclip the cables.
- Swivel the rear linkage (5) forwards at the bottom.
- Swivel the front linkage (2) to the rear at the top.
- Take the window lifter out of the door.
- Perform basic setting following installation .
Other AUDI procedures
- Removing and installing toothed belt – Audi · 56 torque figures
- Removing engine – Audi A8 D3 · 41 torque figures
- Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
- Installing engine – Audi A8 D4 · 36 torque figures
- Removing and installing camshaft timing chain · 29 torque figures
- Dismantling and assembling gearbox (version without circlip (A) for input shaft sealing cap)
- Removing and installing cylinder head (2.0 ltr. engine with assembly clearance feature)
- Removing gearbox - Audi A4, A5 with 4-cyl. TDI engine, PR-TH3/TM4
- Removing gearbox - vehicles with 6-cyl. petrol engine
- Removing gearbox - vehicles with 8-cyl. petrol engine (RS 5/RS 4)
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.