Removing and installing TV tuner J415: Audi A2

🧭 Before you start

Fits: Audi A2 (8Z)

📋 Procedure

1. Switch off all electrical equipment.
2. Remove ignition key.
3. Remove load compartment floor in luggage compartment General body repairs, interior70.
4. Insert radio release keys T10057 in slots (arrows) such that pointed ends of grips face outwards and release keys engage.
5. Grasp hold of grips on release keys and pull control unit out of holder.

6. Unplug connectors.
7. Press tab and pull out release keys to front.
8. Plug in connector.
9. Slide control unit into mounting frame until it engages.
10. Control unit encoding and adaption Radio, telephone and navigation system, self-diagnosis01.
11. Check operation.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Checking voltage under load
• Converting headlamp connector on wiring harness
• Checking specific gravity of all cells
• Servicing wheel bearing housing with pressed-in wheel bearing
• Dismantling and assembling triple roller joint