Removing and installing TV card reader R204, from week 45/2008 onwards — AUDI
Removing and installing TV card reader R204, from week 45/2008 onwards on Audi: 10 steps. What to remove, in what order, and what to check after.
Workshop procedure for AUDI — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: Audi A5 (8T, 2007–2016)
📋 Procedure
- Switch off all electrical equipment.
- Remove ignition key.
- Open left-side luggage compartment storage area.
- Remove SIM card from TV card reader R204.
- Release and unplug connectors at digital sound package control unit J525.
- Fit protective cap for cable connectorVAS 6223/9(1) onto MOST bus connector (2).
- Unscrew nuts (1) and bolts (3) from bracket (2) and lift bracket with digital sound package control unit J525(2) into luggage compartment.
- Release and unplug connector at TV card reader R204.
- Unscrew bolts (3) at TV card reader R204(2) and detach it from bracket (1).
- Install in reverse sequence of removal.
Other AUDI procedures
- Removing and installing toothed belt – Audi · 56 torque figures
- Removing engine – Audi A8 D3 · 41 torque figures
- Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
- Installing engine – Audi A8 D4 · 36 torque figures
- Removing and installing camshaft timing chain · 29 torque figures
- Removing and installing column tube with steering column
- Removing and installing C-pillar trim (top) – Audi A3 · 2 torque figures
- Removing and installing supplementary air heater element Z35 (with supplementary air heater control unit J604) · 2 torque figures
- Removing and installing side window – Audi A6 C6
- Removing and installing bevel box – Audi A3
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.