Removing and installing telephone transmitter and receiver unit R36 (fixed installation telephone) — AUDI

🧭 Before you start

Fits: Audi A4 Cabriolet B6/B7 (8H)

Don't miss

• Seat belt at seat frame does not have to be unfastened.

📋 Procedure

1. When renewing control unit, select "“Replacement”" function for appropriate control unit in "“Guided Fault Finding”".
2. Switch off all electrical equipment.
3. Remove ignition key.
4. Remove front seat (right-side) General body repairs, interior72Front seats. [Note: Seat belt at seat frame does not have to be unfastened.]
5. Remove A-pillar trim (bottom right): General body repairs, interior70Trim.

6. Fold back the floor covering: General body repairs, interior70Trim.
7. Release cover for electronics box (arrows) and remove cover.
8. Unplug connectors (2) at telephone transmitter and receiver unit R36(1).
9. Remove telephone transmitter and receiver unit R36(1) from electronics box.
10. Installation is performed in reverse sequence.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures