Removing and installing steering column switch for adjustable steering column — AUDI

🧭 Before you start

Fits: platform code 4A

Don't miss

• Make sure the wheels are in straight ahead position before fitting the steering wheel.

📋 Procedure

1. Remove the steering wheel: Vehicles without airbag , vehicles with airbag .
2. Swivel down the longitudinal adjustment lever and prise off the spring clip with a screwdriver.
3. Detach the longitudinal adjustment lever.
4. Slacken off the hexagon socket head bolt and detach the angle adjustment lever.
5. Unscrew and detach the upper steering column switch trim.

6. Screw out the bolt for the bellows.
7. Unfasten the clamp at the steering column switch.
8. Unplug the connectors from the steering column switch (1).
9. Detach the steering column switch with lower trim.
10. Disengage the bellows from the dash panel and detach. [Note: Make sure the wheels are in straight ahead position before fitting the steering wheel.]
11. On vehicles with an airbag, engage (arrow) the connector for the airbag at the appropriate location on the bellows before fitting the top part of the steering column switch.
12. Install the steering wheel: Vehicles without airbag , vehicles with airbag .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing the coolant pump – Audi 1.6 CHGA
• Checking non-return valve for fuel pump
• Emptying fuel tank, four-wheel drive, engine codes BJB, BLS, BSU
• Removing and installing fuel delivery unit, front-wheel drive, engine codes CAYD, CAYE, CFHC, CFHE, CFHF, CLCA, CFJA
• Removing and installing fuel delivery unit, four-wheel drive · 1 torque figures