Removing and installing spoiler for rear window: Audi Q7
Step-by-step removing and installing spoiler for rear window for the Audi Q7: 10 steps. What to remove, in what order, and what to check after.
Workshop procedure for AUDI — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: Audi Q7 (4M, 2015–)
- Special tools named: T10383/1, 3356
📋 Procedure
- Carefully heat spoiler (2) with hot air blowerV.A.G 1416.
- Carefully lever spoiler off rear lid (1) using wedge T10383/1 in vicinity of clips (3).
- Detach spoiler.
- Check foam seal (4) for damage.
- Clean bonding surface with cleaning solutionD 009 401 04.
- Fold over ends of protective film or attach a removal aid to protective film (3), as shown in illustration.
- Align spoiler (6) at rear lid (1) using centring pin (2).
- Peel protective film off adhesive strip (5) using removal aid.
- Press spoiler onto rear lid so that it engages audibly.
- Press spoiler on over entire length using roller 3356.
Other AUDI procedures
- Removing and installing toothed belt – Audi · 56 torque figures
- Removing engine – Audi A8 D3 · 41 torque figures
- Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
- Installing engine – Audi A8 D4 · 36 torque figures
- Removing and installing camshaft timing chain · 29 torque figures
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.