Removing and installing seat trims (with side airbag) — AUDI

🧭 Before you start

Fits: platform codes S1, 2H

📋 Procedure

1. Remove front seat .
2. Remove belt buckle
3. Remove drawer
4. Turn backrest adjusting wheel (3) until a detent can be seen from the rear. Use a torch if necessary.
5. Apply assembly tool3399 behind a detent of backrest adjusting wheel (3).

6. Lever assembly tool3399 outwards (arrow A) and thus detach backrest adjusting wheel (3) from seat (1).
7. Use a small screwdriver to prise covers (6) out of the mountings in the adjustment lever (4).
8. Remove bolt (5) and remove adjustment lever (4).
9. Remove bolts (8) and remove seat rail cover (7) (depending on model variant).
10. Unscrew bolts (11) and remove left trim (10) with trim (9).
11. Unscrew bolts (13) and remove right trim (12).
12. Remove left cover (2) and right cover (14) from mountings in seat frame.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures