Removing and installing seat side trim (sill side): Audi A4 B9

🧭 Before you start

Fits: Audi A4 B9 (8W, 2015–)

Don't miss

• Make sure that electrical connectors are pressed on as far as they will go and engage audibly.

📋 Procedure

1. Move front seat as far upwards as it will go.
2. Depending on equipment version: Remove backrest adjuster knob .
3. Depending on equipment version: Remove seat height adjuster .
4. Remove spreader rivet (2).
5. Disengage retainer (front) (arrow) on inside upwards at seat side trim.

6. Detach seat side trim (1) upwards.
7. Depending on equipment version: Press release mechanism and unplug electrical connectors:
8. Move clear electrical wiring harness.
9. Detach seat side trim (sill side).
10. Remove spreader rivet (2).
11. Unscrew bolts (arrows) and detach retainer (1). [Note: Make sure that electrical connectors are pressed on as far as they will go and engage audibly.]

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing coarse oil separator
• Exploded view - selector cables: gearbox selector lever and gate relay lever
• Removing run-flat tyres
• Exploded view of "„K2/K3“" clutch housing
• Checking thermostat for map-controlled engine cooling system