Removing and installing seat pan: Audi A6 C6

🧭 Before you start

Fits: Audi A6 C6 (4F, 2004–2011)

📋 Procedure

1. Remove seat .
2. Attach seat repair standVAS 6136 to engine and gearbox supportVAS 6095.
3. Attach front seat to seat repair standVAS 6136.
4. Remove side trim (sill side) .
5. Remove side trim (tunnel side) .

6. Remove handle for seat longitudinal adjustment
7. Press cable sleeve out of cable support bracket in direction of (arrow A).
8. Detach operating cable (1) for seat longitudinal adjustment from release lever (arrow B).
9. Release securing clip (4) at operating cable in direction of (arrow A) and lift off securing clip (arrow B).
10. Release retaining spring (2) using a narrow-bladed screwdriver (3).
11. Pull seat rail release lever (1) upwards out of rotary shaft.
12. Unscrew bolt (1) and sever cable ties (arrows).
13. Move clear electrical wiring harness at retaining plate.
14. Unplug electrical connectors (2 and 4).
15. Disconnect pneumatic hose (3).
16. Remove bolts (arrow).
17. Detach seat pan (2) from seat frame.
18. Insert bolts with locking fluid; locking fluid Electronic parts catalogue.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing charge air cooling pump V188 – Audi
• Removing and installing ignition coils with output stages, cylinder bank 2 (left-side)
• Removing and installing Bowden cable for backrest release mechanism
• Removing and installing Bowden cable A for Easy Entry system
• Separating engine and gearbox - vehicles with dual clutch gearbox 0D9