Removing and installing safety latch: Audi A8 D3

🧭 Before you start

Fits: Audi A8 D3 (4E, 2002–2010)

Don't miss

• Make sure the spring (7) is inserted in the mounting plate (6).

📋 Procedure

1. Remove the seat .
2. Attach the holder for seat repairVAS 6136 to the engine and gearbox holderVAS 6095.
3. Attach the front seat to the holder for seat repairVAS 6136.
4. Unscrew the bolts (1) (2x).
5. Detach the mounting plate (6) and the latch (4).

6. For complete removal: Unscrew the bolts (2) (2x) and detach the mounting plate (3).
7. Following complete removal: Screw on the mounting plate (3) with the bolts (2) (2x).
8. Make sure the spring (7) is inserted in the mounting plate (6).
9. Insert the latch (4) flush with the stop (5) and the spring (7).
10. Screw on the mounting plate (6) and the latch (4) with the bolts (1) (2x).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Adjusting throttle cable - 8-cyl. engine (code letters ABH, AEC)
• Testing fuel pump (electrical test) from approx. 11.98
• Testing fuel pump -G6 (pre-supply pump) (electrical test)
• Testing fuel pump delivery rate
• Adjusting accelerator position sender