Removing and installing rollers and support, table module in seat rails — AUDI

🧭 Before you start

Fits: VW Transporter T5 (7H), VW Transporter T5 (7J), VW Transporter T6 (7E), VW Transporter T6 (7F)

📋 Procedure

1. Remove table module .
2. Remove drawer
3. Move table into upper position.
4. Remove front trim .
5. Remove rear trim .

6. Remove right trim .
7. Unscrew bolt (7) and take out roller (4) with spacer sleeve (5) between base structure (1) and support (6).
8. Unscrew bolt (9) and take out roller (11) with spacer sleeve (10) between base structure (1) and support (6).
9. Release spring (2) to remove from guiding element (3).
10. Unscrew bolts (8) (Qty. 4) and remove support (6) and guiding element (3) from base structure (1).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing upper part of sump - engine generation III
• Detaching toothed belt from camshaft sprocket > 07.91
• Removing and installing toothed belt assembly 08.91 ä – Audi
• Testing a "two-wire bus system"
• Coding of operating and display unit with two displays