Removing and installing reversing light bulb M76/M77: Audi A5

🧭 Before you start

Fits: Audi A5 (8T, 2007–2016)

Don't miss

• Fit retainer bracket (large) (3) onto stud on inner tail light cluster; centring pins (2) and (6) must engage in mountings.
• As the nuts are tightened the retainer brackets become wedged in the rear lid (arrows).Disregard (items 4 and 5).

📋 Procedure

1. Switch off ignition and take out ignition key.
2. Turn light switch to position "“0”".
3. Lever off cover (1) with removal wedge3409(arrow).
4. Unplug electrical connector (3).
5. Remove nut (1) and detach retainer bracket (large) (2).

6. Remove bulb holder (4) from housing (press retainer bracket up (arrow)).
7. Remove tail light and rear fog light bulb from bulb holder.
8. Pull reversing light bulb out of bulb holder.
9. Insert new bulb in bulb holder, taking care not to touch glass part of bulb with bare hands.
10. Fit retainer bracket (large) (3) onto stud on inner tail light cluster; centring pins (2) and (6) must engage in mountings.
11. Tighten nuts (1). [Note: As the nuts are tightened the retainer brackets become wedged in the rear lid (arrows).Disregard (items 4 and 5).]

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing gearbox on vehicles with 6-cylinder engine – Audi · 2 torque figures
• Renewing rear sealing flange – Audi 2.0 TDI · 3 torque figures
• Removing engine - all engine codes except CUKB, CXUA – Audi A3 · 2 torque figures
• Removing engine - engine codes CUKB, CXUA – Audi A3 · 2 torque figures
• Installing gearbox - vehicles with 2.0 ltr. TDI engine · 4 torque figures