Removing and installing rear window frame — AUDI

🧭 Before you start

Fits: platform code 42

Don't miss

• Make sure that water drain (2) for rear window frame (item 1) is fully inserted in mounting (3) for water drain hose (both sides).

📋 Procedure

1. Remove centre engine compartment trim (front) .
2. Remove base retainer for fuse holder (rear right) and move clear to one side with wiring connected Electrical system97.
3. Remove valve block and move clear to one side with lines connected .
4. Remove rear window motor V456.
5. Unplug electrical connectors (1) and (2).

6. Remove bolts (arrows).
7. Lift out rear window frame (3).
8. Make sure that water drain (2) for rear window frame (item 1) is fully inserted in mounting (3) for water drain hose (both sides).
9. Install centre engine compartment trim (front) .
10. Install base retainer with fuse holder (rear right) Electrical system97.
11. Install valve block .
12. Install rear window motor V456.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures