Removing and installing rear loudspeakers in Camper — AUDI

🧭 Before you start

Fits: VW Transporter T5 (7H), VW Transporter T6 (7E), VW Transporter T6 (7F)

Don't miss

• When inserting loudspeaker covers, take care that loudspeaker wires are routed correctly.

📋 Procedure

1. Switch off ignition and all electrical loads, and pull out ignition key.
2. Open rear storage compartment.
3. Use a suitable tool to lever glued loudspeaker cover off carefully (arrows).
4. Use a suitable tool to lever glued loudspeaker cover of mid-range and treble loudspeaker off carefully (arrows).
5. Remove securing bolts (arrows) and release and disconnect connector (A).

6. Remove bass loudspeaker. [Note: When inserting loudspeaker covers, take care that loudspeaker wires are routed correctly.]
7. Remove securing bolts (arrows) and release and disconnect connector.
8. Remove mid-range and treble loudspeaker.
9. Insert the plastic spacer sleeves properly (arrow).
10. Secure loudspeaker with the 3 securing bolts and connect and engage connector (A). [Note: When inserting loudspeaker covers, take care that loudspeaker wires are routed correctly.]

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing earth cable with battery monitor control unit 2J934 of second battery A1
• Removing and installing headlights - vehicles up to model year 2013
• Removing and installing tail light cluster on rear lid - vehicles up to model year 2013
• Removing and installing belt height adjuster - electric belt height adjuster
• Removing and installing seat side trim (sill side) with trim (front)