Removing and installing rear floor covering, Kombi and comfort version — AUDI

🧭 Before you start

Fits: VW Caddy IV (SA, 2015–2020)

📋 Procedure

1. Switch off ignition.
2. Remove front seats (see the separate procedure).
3. Remove seats from 1st row (see the separate procedure).
4. Remove seats from 2nd row (see the separate procedure).
5. Remove covers of securing strips (see the separate procedure).

6. Remove centre console (see the separate procedure).
7. Remove lock carrier cover, Kombi (see the separate procedure).
8. Remove seat frame adapter (see the separate procedure).
9. Remove B-pillar trim, Kombi (see the separate procedure).
10. Remove rear sill panel mouldings, Kombi (see the separate procedure).
11. Remove storage compartment frame (see the separate procedure).
12. Remove side moulded trim (see the separate procedure).
13. Remove bolts (1).
14. Remove tie-down ring (2) and carpet retainer (3).
15. Remove remaining tie-down rings and carpet retainers.
16. Remove floor covering from vehicle.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing steering column, as of model year 2008
• Removing and installing valve stem seals, cylinder head installed
• Removing and installing valve stem seals, cylinder head removed
• Removing and installing valve stem seals (cylinder head removed)
• Removing and installing floor covering, Transporter