Removing and installing rear bench seat cover and padding — AUDI

🧭 Before you start

Fits: platform codes 2EA, 2ED, 2EH, 2EX, 2EB, 2EE, 2EK, 2FC, 2FF, 2FL, 2FZ, 2FG, 2FM

📋 Procedure

1. Remove bench seat .
2. Remove cover and backrest padding .
3. Release clip profiles (1) from around seat frame (2).
4. Remove cover and padding (3) from seat frame.
5. Release clips (1) on rear of padding and guide cover ends (2) through openings (3) for belt buckles/belt webbing.

6. Fix cover on padding and secure it with padding clips.
7. Guide cover (2) through openings (3) for belt buckles/belt webbing.
8. Secure cover (2) with padding clips (1).
9. Place cover and padding (3) onto seat frame.
10. Engage clip profiles (1) around circumference of seat frame (2).
11. Install backrest cover .
12. Install bench seat .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Exploded view - mechatronic unit · 4 torque figures
• Exploded view of 2nd row (3 seats) · 4 torque figures
• Exploded view of 2nd row (2 seats) · 4 torque figures
• Exploded view of rear shelf · 4 torque figures
• Exploded view - electronics box (engine compartment), connector point (plenum chamber) · 4 torque figures