Removing and installing radioR: Audi A5
Step-by-step removing and installing radioR for the Audi A5: 10 steps. What to remove, in what order, and what to check after.
Workshop procedure for AUDI — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: Audi A5 (8T, 2007–2016)
📋 Procedure
- When renewing control unit, select "“Replacement”" function for appropriate control unit in "“Guided Fault Finding”".
- Switch off all electrical equipment.
- Shift selector lever to "“N”" position (automatic gearbox) or move gear lever to the rear (manual gearbox).
- Remove ignition key.
- Remove air conditioner operating unit Heating, air conditioning87Operating and display unit; Removing and installing operating and display unit.
- Remove dash panel vent above radioRGeneral body repairs, interior70Dash panel; Removing and installing dash panel vents.
- Remove bolts (arrows) at radioR(1).
- Pull radioR(1) out of dash panel.
- Release and unplug connectors at radioR.
- Install in reverse sequence of removal.
Other AUDI procedures
- Removing and installing toothed belt – Audi · 56 torque figures
- Removing engine – Audi A8 D3 · 41 torque figures
- Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
- Installing engine – Audi A8 D4 · 36 torque figures
- Removing and installing camshaft timing chain · 29 torque figures
- Removing and installing backrest cover and padding - split rear seat backrest
- Removing and installing operating and display unit (air conditioning system control unit J301 / heater control unit J65) · 1 torque figures
- Removing and installing drive shaft with triple roller joint AAR3300i (with external splines for insertion in gearbox)
- Removing and installing control unit for electromechanical parking brake J540 · 1 torque figures
- Removing and installing curtain airbag with airbag igniter - Saloon
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.