Removing and installing output module for right matrix headlight A45 - vehicles from model year 2015 onwards — AUDI

🧭 Before you start

Fits: Audi A6/A7 C7 (4G, 2011–2018)

📋 Procedure

1. Remove wheel.
2. Remove front wheel housing liner General body repairs, exterior66Wheel housing liners; Removing and installing wheel housing liner (front).
3. Remove bolts (arrows).
4. Pull off output module (1).
5. Check seal (2) between output module and headlight for damage.

6. Install front wheel housing liner General body repairs, exterior66Wheel housing liners; Removing and installing wheel housing liner (front).
7. Fit wheel Wheels and tyres44Fitting wheels / tyres / Tyre Pressure Monitoring System / Tyre Pressure Loss Indicator.
8. Remove headlight housing .
9. Remove bolts (arrows).
10. Pull off output module (1).
11. Check seal (2) between output module and headlight for damage.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Checking intake manifold pressure sender G71 – Audi A8 D2
• Checking operation – Audi Q7
• Renewing oil seal for Hall sender - cylinder head (right-side)
• Installing sump (top section) - "engine generation III" – Audi · 1 torque figures
• Removing and installing secondary air pump – Audi TT Mk1