Removing and installing oil pressure line for turbocharger — AUDI

🧭 Before you start

Fits: platform codes S1, 2H

• Renewed: seals

Don't miss

• The securing bolts for the assembly mountings may be removed only if the engine is supported with support bracket10-222 A!
• Procedure must be adhered to, this ensures that the oil pressure line is installed stress-free.

🔧 Engine codes this applies to

📋 Procedure

1. Position engine with support bracket10 - 222 A as shown and take up weight of engine in installation position. [Note: The securing bolts for the assembly mountings may be removed only if the engine is supported with support bracket10-222 A!]
2. Remove air filter housing .
3. Remove starter Electrical system27Removing and installing starter.
4. Remove right engine support .
5. Remove securing bolt (2).

6. Remove banjo bolts (1 and 3).
7. Collect escaping oil with a cloth.
8. Remove bolts (1) and remove oil pressure line.
9. Collect escaping oil with a cloth. [Note: Procedure must be adhered to, this ensures that the oil pressure line is installed stress-free.]
10. Renew seals, gaskets and self-locking nuts.
11. Fit new seals (2) onto the respective line connection (3) and secure by screwing in the corresponding banjo bolt (1).
12. Install starter Electrical system27Removing and installing starter.
13. Install right engine support .
14. Install charge air pipe .
15. Install air filter housing .

Other AUDI procedures

• Measuring radial play of camshaft – Audi 2.0 TDI · 1 torque figures
• Removing and installing air filter housing – Audi 2.0 TDI
• Assembly overview - poly V-belt drive · 1 torque figures
• Removing and installing high-pressure accumulator (rail)
• Removing and installing radiator cowling with radiator fan
• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures