Removing and installing mounting bracket with strut — AUDI

🧭 Before you start

Fits: VW Caddy III (2K, 2004–2015); platform code 2C0

📋 Procedure

1. Remove steering column .
2. Remove centre section of plenum chamber bulkhead 50Assembly overview - plenum chamber bulkhead.
3. Remove bolt (arrow) in plenum chamber.
4. Remove bolts (arrows) under bracket.
5. Remove bolts (arrows).

6. Mounting bracket with strut can now be detached from body.
7. Position mounting bracket, fit all 4 bolts and then tighten bolts prescribed torque.
8. Secure strut to body by tightening bolt (arrow) to prescribed torque.
9. Now tighten securing bolt for mounting bracket and strut (arrow) to prescribed torque.
10. Install steering column.
11. Carry out basic setting for steering angle sender G85 using .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures