Removing and installing moulded headliner, single cab — AUDI

🧭 Before you start

Fits: platform codes S1, 2H

• Renewed: if necessary

Don't miss

• Before installing, check clips (2) and metal clips (3) for damage and replace if necessary.

📋 Procedure

1. Remove front interior light Electrical system96Lights and switches in roof trim.
2. Remove interior rear view mirror .
3. Remove sun visors together with mounting fixtures .
4. Remove upper right and left A-pillar trims .
5. Remove right and left B-pillar trims .

6. Remove left and right roof grab handles .
7. Using a screwdriver, carefully release metal clips (3) from roof cross member.
8. Unclip clips (2) (qty. 3) from moulded headliner (1).
9. Remove moulded headliner (1) from vehicle through door opening with help of a second mechanic. [Note: Before installing, check clips (2) and metal clips (3) for damage and replace if necessary.]
10. Guide moulded headliner (1) through door opening into vehicle with help of a second mechanic.
11. Engage metal clips (3) in roof cross member.
12. Insert rear centre clip (2) in roof cross member.
13. Insert remaining 2 clips (2) in any sequence.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing drive pinion
• Connecting vehicle diagnostic, testing and information system VAS 5051 or fault reader V.A.G 1551 and selecting functions
• Hydraulic unit and brake pipes
• Checking coolant temperature gauge
• Checking refrigeration capacity of fully automatic air-conditioner