Removing and installing moulded headliner, double cab — AUDI

🧭 Before you start

Fits: platform codes S1, 2H

• Renewed: as necessary

Don't miss

• Before installing, check clips (2) for damage and renew as necessary.

📋 Procedure

1. Remove front interior light Electrical system96Lights and controls in roof trim; Removing and installing front interior light.
2. Remove centre interior light Electrical system96Lights and controls in roof trim; Removing and installing centre interior light.
3. Remove interior rear view mirror .
4. Remove sun visors together with mounting fixtures .
5. Remove upper right and left A-pillar trims .

6. Remove right and left B-pillar trims .
7. Remove right and left C-pillar trims .
8. Remove left and right roof grab handles .
9. Remove rear window General body repairs, exterior;64Rear window; Removing and installing rear window.
10. Unclip glasses holder (4) from frame (3).
11. Unclip frame (3) from overhead console.
12. Unclip clips (2) (qty. 6) from moulded headliner (1).
13. Using a screwdriver, carefully release metal clips (qty. 2) beneath glasses compartment.
14. Pull moulded headliner (1) out of mountings in roof frame.
15. Remove moulded headliner (1) from vehicle through the rear window opening with help of second mechanic. [Note: Before installing, check clips (2) for damage and renew as necessary.]

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures