Removing and installing mirror adjustment switch E43: Audi Q7

🧭 Before you start

Fits: Audi Q7 (4L, 2005–2015)

Don't miss

• When installing, make sure symbol trim is inserted before the mirror adjustment switch.

📋 Procedure

1. Switch off ignition and take out ignition key.
2. Remove door trim (front) 70.
3. Detach insulating mat from door trim.
4. Disengage air duct (1) at door trim (arrows).
5. Detach insulating mat (3) from door trim.

6. Unplug electrical connectors (1) and (2).
7. Unscrew bolts (arrows).
8. Detach armrest (1) in direction of (arrow).
9. Detach switch mounting from armrest.
10. Use small screwdriver to carefully release retaining hooks (arrows).
11. Pull mirror adjustment switch E43(item 1) downwards out of switch mounting. [Note: When installing, make sure symbol trim is inserted before the mirror adjustment switch.]
12. Press switch into switch mounting until retaining hooks engage.
13. Fit switch mounting into armrest.
14. Install armrest 70.
15. Install air duct 70.
16. Install door trim (front) 70.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing rear brake caliper (PR 1KF and 2EA) · 1 torque figures
• Removing and installing rear brake caliper (PR 1KD) – Audi Q7 · 1 torque figures
• Installing air conditioning unit (front) – Audi Q7
• Removing and installing power steering pump (vehicles with V8 FSI engine)
• Removing and installing main fuse holder in vehicle floor (driver's side)