Removing and installing microswitch for lowering window E621/E622 — AUDI

🧭 Before you start

Fits: Audi A3 (8V, 2012–2020)

Don't miss

• Risk of malfunctions.Take care not to bend or kink operating cable. — Move door window to "“closed”" position.

📋 Procedure

1. ⚠ Risk of malfunctions.Take care not to bend or kink operating cable. — Move door window to "“closed”" position.
2. Remove door handle .
3. Remove inner door cover .
4. If fitted, move electrical wiring (2) clear at mounting bracket (3).
5. Detach sealing piece (rear) (4).

6. Remove bolt (1).
7. Press mounting bracket slightly in direction of (arrow) from inside of door and detach.
8. Unplug electrical connector (1) and move wiring harness clear.
9. Release fasteners (arrows).
10. Pull microswitch for lowering window (2) off mounting bracket (3).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing condenser (vehicles with 4-cyl. and 6-cyl. engine) · 1 torque figures
• Assembly sequence - gearbox without circlip (A) for input shaft sealing cap
• Renewing Motronic control unit J220 – Audi A3
• Adjusting vacuum unit for turbocharger, engines with code letters AXX, BPY, BWA
• Removing and installing thermostat housing and coolant pipe (rear)