Removing and installing lock carrier - Audi S6/RS 6: Audi A6/A7 C7

🧭 Before you start

Fits: Audi A6/A7 C7 (4G, 2011–2018); platform code 4X

Don't miss

• (Item 5) not installed.

📋 Procedure

1. Remove noise insulation (front) .
2. Remove impact bar .
3. Remove radiator with radiator cowl 19Radiator/radiator fans; Removing and installing radiator.
4. Remove bolt (4).
5. Unplug electrical connectors (1 and 2).

6. Unplug electrical connector (3) at crash sensor for front airbag (observe safety precautions General body repairs, interior00Safety precautions; Safety precautions when working on pyrotechnic components).
7. Detach bonnet lock cable at coupling unit and move clear at lock carrier .
8. Remove bolt (6).
9. Have a second mechanic hold lock carrier (4) in position and unscrew bolts (1 ... 3). [Note: (Item 5) not installed.]
10. Detach lock carrier with mountings for impact bar with help of second mechanic.
11. Install headlight housing Electrical system94Headlights; Removing and installing headlights.
12. Align bumper cover mounting (front) (2), hold in position and tighten bolt (1).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures