Removing and installing lining for spare wheel well: Audi A3

🧭 Before you start

Fits: Audi A3 (8V, 2012–2020); platform code 85

📋 Procedure

1. Remove rear seat backrests .
2. Remove luggage compartment floor.
3. Take out vehicle tool kit.
4. Remove lock carrier trim .
5. Remove support for luggage compartment floor .

6. Equipment version with subwoofer: Remove subwoofer Communication91Sound system; Overview of fitting locations - sound system.
7. Equipment version with spare wheel: Take out spare wheel.
8. Equipment version with jack: Take out jack, unscrew nuts (1 and 2) and remove mounting (3) for jack.
9. Remove spreader rivets (3).
10. If fitted, remove nuts (2).
11. Pull lining (1) for spare wheel well out from underneath luggage compartment side trim panels from the side and lift out.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing pipe/hose assembly or plastic pipe
• 6-speed manual gearbox 0AG — Checking oil level in manual gearbox
• Bleeding coolant circuit – Audi A6 C6
• Balance shaft assembly with oil pump - exploded view · 1 torque figures
• Removing and installing engine cover panel with air filter element