Removing and installing inner door seal - Coupé: Audi TT Mk2

🧭 Before you start

Fits: Audi TT Mk2 (8J, 2006–2014)

📋 Procedure

1. Pull door seal off door flange all around and out of seal rails at top and at side window.
2. Start by pressing door seal into seal rail at B-pillar (top) (arrow).
3. Then press door seal into seal rail at A-pillar (top) (arrow).
4. At roof frame, first press door seal in at centre, then along entire length of seal rail.
5. Push door seal into seal rail at bottom of side window.

6. Then push seal fully into seal rail in area of side window, starting from the centre.
7. Press door seal onto door flange at B-pillar (bottom).
8. Then push door seal on between side window and B-pillar (bottom), starting in centre.
9. Press door seal onto door flange at A-pillar (bottom).
10. Then press door seal onto door flange between A-pillar and B-pillar (bottom), starting in centre.
11. Press door seal on completely between A-pillar (bottom) and A-pillar (top), starting in centre.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures