Removing and installing glove compartment — AUDI

🧭 Before you start

Fits: VW Caddy III (2K, 2004–2015); platform code 2C0

Don't miss

• The removal and installation procedures may deviate slightly depending on model year.

📋 Procedure

1. Switch off ignition.
2. Remove side dash panel cover, passenger's side . [Note: The removal and installation procedures may deviate slightly depending on model year.]
3. Lever out glove compartment light from mounting using removal wedge3409. To do this, position removal wedge in upper area of light.
4. Separate wiring harness from light.
5. Unscrew side bolts (2) on left.

6. Unscrew bolts (3).
7. Unscrew bolts (4).
8. Release glove box (1) from dash panel.
9. On vehicles with front passenger airbag deactivation, separate wiring harness from key switch Electrical system96Lights and control elements in dash panel; Removing and installing front passenger airbag warning lamp
10. In vehicles equipped with glove compartment cooling, disconnect air conditioning duct from glove compartment.
11. On vehicles equipped with AUX-in, disconnect wiring harness from connector. Communication system91Infotainment; Connection for external audio sources

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures