Removing and installing front seat heating switches: Audi A2

🧭 Before you start

Fits: Audi A2 (8Z)

📋 Procedure

1. Switch off ignition and remove ignition key.
2. Lever storage compartment (1) out of centre console.
3. Release retaining clips and remove seat heating switch (2) from storage compartment.
4. Remove the radio set/navigation control unit 91.
5. Pull the air conditioning system/Climatronic operating and display unit E87 out of the centre console (arrow).

6. Press back connector catches (F) and detach electrical connectors (A … D).
7. Press back connector catches (G) and detach electrical connector (E) (for heated rear window).
8. Carefully release retaining clips (arrows) using a small screwdriver.
9. Take the seat heating switches (1) and (2) out of the air conditioning system/Climatronic operating and display unit E87.
10. Plug in the connector.
11. Install the radio or navigation system 91.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing mounting bracket for alternator, power steering pump and viscous fan
• Checking activated charcoal filter solenoid valve 2N115
• Checking fuel system diagnostic pump V144 – Audi TT Mk1 1.8
• Removing and installing turbocharger- engine codes AVB, AVF, AWX and BKE
• Checking air recirculation valve for turbocharger N249 - vehicles with electronic throttle