Removing and installing digital sound package control unit 2J787, Bang & Olufsen, up to model year 2013, including vehicles with high-voltage electrical system — AUDI

🧭 Before you start

Fits: Audi A8 D4 (4H, 2010–2017)

📋 Procedure

1. Switch off ignition and all electrical equipment and remove ignition key.
2. Remove luggage compartment back panel trim General body repairs, interior70Luggage compartment trim panels; Exploded view - luggage compartment side trim.
3. Release and unplug connectors (3), (4) and (5) at digital sound package control unit J525(1).
4. Fit protective cap for cable connectorVAS 6223/9(1) onto MOST bus connector (2).
5. Unscrew bolts (2) at digital sound package control unit J525(1) and detach digital sound package control unit J525(1) from bracket.

6. Release and unplug connector (2) at digital sound package control unit 2J787(1).
7. Release and unplug connectors on TV tuner R78.
8. Fit protective cap for cable connectorVAS 6223/9(1) onto MOST bus connector (2).
9. Unscrew nuts (3) and (4) and detach bracket (1) with TV tuner R78 and digital sound package control unit 2J787 from luggage compartment.
10. Remove TV tuner R78.
11. Unscrew nuts (1) from bracket (top) (2) and detach bracket (2) from digital sound package control unit 2J787(3).
12. Unscrew nuts (1) from bracket (bottom) (2) and detach bracket (2) from digital sound package control unit 2J787(3).
13. Install in reverse sequence of removal.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures