Removing and installing connection for external audio sources R199 (AMI) (Coupé) — AUDI

🧭 Before you start

Fits: platform code 42

Don't miss

• Insert two radio release tools T10057 into slots on connection for external audio sources R199(1) until they engage. Pointed ends of grips must face outwards.

📋 Procedure

1. Switch off ignition and all electrical equipment and remove ignition key.
2. Remove rear shelf General body repairs, interior70Passenger compartment trim panels - R8 Coupé; Removing and installing rear shelf.
3. Remove bolts (arrows).
4. Release and unplug connector (2) at connection for external audio sources R199(1).
5. Insert two radio release tools T10057 into slots on connection for external audio sources R199(1) until they engage. Pointed ends of grips must face outwards.

6. Pull connection for external audio sources R199(1) out of mounting frame.
7. Release and unplug all connectors at connection for external audio sources R199(1).
8. Press release tabs on connection for external audio sources R199 and remove radio release tools T10057.
9. Unscrew bolts (2) on bottom.
10. Push tabs (4) and (5) downwards and upwards and slide control unit out of frame (1) to rear.
11. Install in reverse sequence of removal.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing engine - engine codes AEB, AJL – Audi 1.8
• Cleaning evaporator using pressure-feed spray gun V.A.G 1538 and spray lance
• Removing and installing selector mechanism (vehicles up to 05.99)
• Removing and installing wiper arms – Audi Q7 · 1 torque figures
• Removing and installing catalytic converter – Audi A1