TorqFix

Removing and installing centre armrest (top section): Audi A4 B9

Step-by-step removing and installing centre armrest (top section) for the Audi A4 B9: 10 steps. What to remove, in what order, and what to check after.

Workshop procedure for AUDI — the exact step sequence and torque figures, straight from real workshop data.

10 steps

🧭 Before you start

Fits: Audi A4 B9 (8W, 2015–)

📋 Procedure

  1. Open centre armrest.
  2. Starting at rear, unclip cover (1) from centre armrest using removal lever80-200(arrows).
  3. Unclip cover completely and detach.
  4. Remove bolts (1 and 2).
  5. Disengage centre armrest (top section) (2)(arrow) and remove.
AUDI? Steps differ between engine variants — check this job against your exact car before you commit to it. Check my car — free →
  1. Open centre armrest.
  2. Starting at rear, unclip cover (1) from centre armrest using removal lever80-200(arrows).
  3. Unclip cover completely and detach.
  4. Remove bolts (1).
  5. Disengage centre armrest (top section) (2)(arrow) and remove.

Who makes these pages, and how

TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.

The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.

Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.

Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com

The story behind TorqFix →

Workshop data on this page last updated 20 Sep 2026.