Removing and installing Bowden cable for seat longitudinal adjustment - RS bucket seat — AUDI

🧭 Before you start

Fits: Audi A4 B8 (8K, 2007–2015)

📋 Procedure

1. Remove seat .
2. Attach seat to seat repair standVAS 6136.
3. Remove side trim (sill side) .
4. Remove handle for seat longitudinal adjustment
5. Press cable sleeve out of support bracket in direction of (arrow A).

6. Detach Bowden cable (1) for seat longitudinal adjustment from release lever (arrow B).
7. Drill out pop rivets (arrows) using a ∅ 4.0 mm bit and detach retaining plate (1) for relay socket and wiring harness.
8. Release securing clip (4) at Bowden cable in direction of (arrow A) and lift off securing clip (arrow B).
9. Release retaining spring (2) using a narrow-bladed screwdriver (3).
10. Pull seat rail release lever (1) upwards out of rotary shaft.
11. Detach Bowden cable for seat longitudinal adjustment.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing bearing housing, Torsen differential, end cover, internal selector mechanism, input shaft, pinion shaft and hollow shaft · 6 torque figures
• Removing and installing sealing flange on gearbox side · 6 torque figures
• Measuring radial clearance of crankshaft – Audi A3 · 11 torque figures
• Draining and filling cooling system – Audi Q7 · 6 torque figures
• Checking timing – Audi 2.5 TDI · 7 torque figures