Removing and installing backrest release microswitch: Audi A4 Cabriolet B6/B7

🧭 Before you start

Fits: Audi A4 Cabriolet B6/B7 (8H)

📋 Procedure

1. Remove seat .
2. Attach seat repair standVAS 6136 to engine and gearbox supportVAS 6095.
3. Attach front seat to seat repair standVAS 6136.
4. Remove side trim (sill side) .
5. Remove side trim (tunnel side) .

6. Remove backrest .
7. Remove backrest cover panel .
8. Remove outer backrest frame .
9. Remove backrest cover and padding .
10. Use screwdriver to prise out fuse (3).
11. Squeeze retaining tabs (5) (2x) and take out microswitch (4).
12. Unplug connector (2).
13. Press in microswitch (4) until retaining tabs (5) (2x) engage.
14. Plug in connector (2).
15. Fit backrest cover and padding .
16. Install backrest .
17. Install seat .
18. Set backrest release microswitch .
19. Insert fuse (3).
20. Install outer backrest frame .
21. Install backrest cover panel .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures