TorqFix

Removing and installing backrest cover panel - sports seat — AUDI

Removing and installing backrest cover panel - sports seat on Audi: 10 steps. What to remove, in what order, and what to check after.

Workshop procedure for AUDI — the exact step sequence and torque figures, straight from real workshop data.

10 steps

🧭 Before you start

Fits: platform code FV

Don't miss

  • If it is difficult to detach, release side retaining hooks with removal lever80-200.
  • Make sure that side retaining tabs engage properly with outer backrest frame and that retaining hooks (bottom) are properly fitted over outer backrest frame.

📋 Procedure

  1. Move front seat as far forwards and down as possible and fold backrest down.
  2. ⚠ Risk of injury from burr on backrest cover panel.Wear protective gloves. — Reach behind right side of backrest cover panel (1) (as shown in illustration) and pull cover panel off outer backrest frame towards right side. [Note: If it is difficult to detach, release side retaining hooks with removal lever80-200.]
  3. Repeat procedure on opposite side.
  4. Pull off backrest cover panel further and bend it until retaining hooks (top) have disengaged from outer backrest frame.
  5. Lift backrest cover panel off backrest (2).
AUDI? Steps differ between engine variants — check this job against your exact car before you commit to it. Check my car — free →
  1. Insert retaining hooks (2) of backrest cover panel in top of outer backrest frame (1).
  2. Swivel backrest cover panel down and engage retaining tabs at sides (3) and at bottom (4).
  3. Make sure that side retaining tabs engage properly with outer backrest frame and that retaining hooks (bottom) are properly fitted over outer backrest frame.
  4. Press backrest cover panel forcefully towards backrest in areas marked by (arrows) until retaining tabs and hooks engage audibly.
  5. Check whether backrest cover panel is properly engaged.

Who makes these pages, and how

TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.

The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.

Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.

Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com

The story behind TorqFix →

Workshop data on this page last updated 20 Sep 2026.