Removing and installing B-pillar trim (Polo Classic, Polo Variant) — AUDI

🧭 Before you start

Fits: platform code 9K9

• Renewed: clips

Don't miss

• Ensure clips are correctly seated on the trim.

📋 Procedure

1. Remove lower trim.
2. Release retaining lugs and unclip cover upwards.
3. Unscrew belt guide .
4. Remove belt guide .
5. Remove cross-head screw .

6. Unclip trim from B-pillar.
7. Check seating and condition of clips . Correct or replace clips if necessary.
8. Check function of belt height adjustment.
9. Loosen sill trim strip and lower C-pillar trim in area of B-pillar.
10. Pull off trim from B-pillar upwards and along the seal and remove at the top from the belt guide .
11. Ensure clips are correctly seated on the trim.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures