Removing and installing auxiliary ATF cooler: Audi A4 Cabriolet B6/B7 / A4 B6/B7

🧭 Before you start

Fits: Audi A4 Cabriolet B6/B7 (8H), Audi A4 B6/B7 (8E)

📋 Procedure

1. Remove front right wheel housing liner 66.
2. If fitted, remove charge air cooler 21.
3. Remove bolts (arrows A) and (arrow B)
4. Remove bolt (arrow).
5. First pull ATF pipe (1) out of auxiliary ATF cooler, then ATF pipe (2).

6. Detach auxiliary ATF cooler
7. First insert ATF pipe (2) all the way into auxiliary ATF cooler, then ATF pipe (1).
8. Screw in bolt (arrow) hand-tight.
9. Fit pin on auxiliary ATF cooler (arrow C) onto mounting of charge air cooler.
10. Tighten bolts:
11. Install charge air cooler 21.
12. Install front wheel housing liner 66.
13. Check and top up ATF level in planetary gearbox .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing cover and padding for right bench seat
• Removing and installing front toothed belt guard (fully enclosing)
• Fitting location on engine
• Checking vacuum hose leading to changeover valve for exhaust gas recirculation cooler N345
• Removing and installing bulb for main beam headlights on roof