Removing and installing actuator motor for remote release of glove box lid — AUDI

🧭 Before you start

Fits: Audi A6 C6 (4F, 2004–2011)

📋 Procedure

1. Switch off ignition and remove ignition key.
2. Remove glove box .
3. Unplug electrical connector (1).
4. Remove bolts (arrows) and take out actuator motor for remote release of glove box lid (2) together with cover.
5. Detach cable (3) with adjuster nut from cable support bracket in cover.

6. Slide cover (2) off actuator motor for remote release of glove box lid (1).
7. Swivel cable (3) and press nipple on brake cable (2) out of actuating rod (1) of actuator motor for remote release of glove box lid.
8. Detach cable.
9. Adjust cable for glove box lid .
10. Install glove box .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing ABS control unit J104/ABS hydraulic unit N55, Audi A1 quattro
• Removing gearbox - vehicles with 1.4 ltr. TFSI engine (EA111), up to model year 2014
• Dismantling and assembling gearbox (version without circlip (A) for input shaft sealing cap)
• Removing and installing cylinder head (2.0 ltr. engine with assembly clearance feature)
• Removing gearbox - Audi A4, A5 with 4-cyl. TDI engine, PR-TH3/TM4