Removing and installing 3rd row seat: Audi Q7

🧭 Before you start

Fits: Audi Q7 (4M, 2015–)

Don't miss

• A second mechanic is required for removing the seat frame (3).
• Make sure that electrical connectors are pressed on as far as they will go and engage audibly.

📋 Procedure

1. Move seats (2nd row) as far forwards as they will go.
2. Fold outer seats (2nd row) forwards.
3. Remove guide for child seat anchor (bottom) .
4. Reach beneath seat padding frame on one side with both hands.
5. Using both hands, pull seat padding (1) firmly and abruptly upwards (arrow A) to disengage wire hook (2) for seat padding frame from retainer (3).

6. Repeat procedure on other side (arrow B).
7. Disengage seat padding from seat frame and take it out of vehicle.
8. Release retainer and unplug electrical connectors (1, 2, 3).
9. Repeat procedure on opposite side.
10. Remove support for luggage compartment floor .
11. Remove bolts (1 and 2). [Note: A second mechanic is required for removing the seat frame (3).]
12. Before lifting out seat frame, attach protectorVAS 871001 as shown in illustration to protect rear bumper.
13. Lift seat frame out of vehicle through rear lid opening with the assistance of a second mechanic.
14. Align seat frame in vehicle and tighten bolts (only hand-tight initially).
15. Tighten bolts in sequence (1, 2). [Note: Make sure that electrical connectors are pressed on as far as they will go and engage audibly.]

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing amplifier with bass loudspeaker (on right in luggage compartment)R43 (BOSE) (Saloon) · 1 torque figures
• Removing and installing locking cable (vehicles up to VIN 8E_6A156499)
• Adjusting locking cable (vehicles from VIN 8E_6A156500 onwards) · 1 torque figures
• Removing and installing front seat, individual seat
• Checking delivery pressure of vane pump