Installing side window: Audi A3

🧭 Before you start

Fits: Audi A3 (8V, 2012–2020); platform code 85

Don't miss

• Use 1-component window adhesiveDH 009 100 03 (small cartridge). If more than one window/glass has to be bonded, 2-component window adhesive setD 004 660 M2 can also be used.

📋 Procedure

1. Notes on installing
2. Preparing new window for installation
3. Preparing undamaged window for installation
4. Preparing body flange for installation [Note: Use 1-component window adhesiveDH 009 100 03 (small cartridge). If more than one window/glass has to be bonded, 2-component window adhesive setD 004 660 M2 can also be used.]
5. Apply adhesive sealant all round next to moulding.

6. When reinstalling an undamaged window, apply adhesive to remaining adhesive bead.
7. Insert new window in opening and press locating pins into B-pillar; then press locating pin into C-pillar.
8. When installing windows without locating pin, align window lengthwise at edge of side panel (arrow) and insert into window opening.
9. Press roof trim strip and side trim strip (bottom) into clips on side panel, centralising window.
10. Secure window glass in position in window opening with adhesive tape.
11. Minimum drying time

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures