Installing:: Audi A3 1.6 (APF, AVU, BFQ)

🧭 Before you start

Fits: Audi A3 (8L, 1996–2003)

Don't miss

• Tap back the thread bushes for the securing bolts approx. 1 mm at the alternator before installing.

🔧 Engine codes this applies to

📋 Procedure

1. Installation is performed in reverse sequence to removal.
2. Install the bracket and the secondary air pump motor.
3. Secure the wiring harness on the bracket with a cable tie.
4. Install bracket for alternator: [Note: Tap back the thread bushes for the securing bolts approx. 1 mm at the alternator before installing.]
5. Install alternator.

6. Reinstall poly V-belt ensuring that it is correctly routed and properly seated.
7. Screw on wiring(1) (terminal 30/B+) and attach connector (2).
8. Screw on cable clip (3).
9. Reconnect the unplugged connectors (intake manifold changeover solenoid valve, Hall sender, secondary air pump motor).
10. Install engine cover.
11. Connect battery earth strap at negative battery terminal.
12. After installation, carry out anti-theft coding according to radio user instructions. The clock as well as the convenience electronics etc are to be checked and activated according to Workshop Manual and/or user instructions.

Other AUDI procedures

• Checking oil pressure and oil pressure switch
• Checking map-controlled engine cooling thermostat – VW
• Checking catalytic converter – VW Passat B5
• Removing and installing engine
• Removing - vehicles with engine code APF – Audi 1.6
• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures