Checking door frame adjustment: Audi A4 B9

🧭 Before you start

Fits: Audi A4 B9 (8W, 2015–)

Don't miss

• If not, door is positioned too far to outside and must be adjusted.
• Height adjustment is correct if bottom edge of window guide (3) is positioned in area of marking (1) on template.
• If not, door must be adjusted.

📋 Procedure

1. Use template T40038/20 to check door frame alignment at two measuring points.
2. Place template at measuring points on body .
3. The points (B, C) on the template should make contact with the door window.
4. If there is a gap between point (A) and edge of roof, check maximum tolerance.
5. Place template at measuring points on body .

6. Points (A, C) on template should make contact with door window and edge of roof.
7. Point (B) may make contact with door window, or there may be a gap in between.
8. If not, door is positioned too far to outside and must be adjusted.
9. Place template at measuring points on body .
10. Point (A) should make contact with edge of roof from side and from below.
11. Points (B, C) should make contact with the door window (4).
12. Height adjustment is correct if bottom edge of window guide (3) is positioned in area of marking (1) on template.
13. If not, door must be adjusted.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures