6-speed manual gearbox 0AJ — Checking gearbox oil — AUDI
6-speed manual gearbox 0AJ — Checking gearbox oil on Audi: 11 steps. What to remove, in what order, and what to check after.
Workshop procedure for AUDI — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: Audi A3 (8P, 2003–2012)
📋 Procedure
- Remove gear oil inspection plug (arrow).
- Top up gear oil if necessary. Gear oil specification .
- Tighten oil filler plug (arrow). Tightening torque
- Remove plug (arrow).
- Fill up gear oil to bottom lip of filler hole.
- Screw in plug (arrow).
- Start engine, engage a gear and allow gearbox to turn for approx. 2 minutes.
- Switch off engine and remove plug (arrow).
- Top up gear oil again to bottom lip of filler hole.
- Tighten oil filler plug to specified torque.
- Install noise insulation below engine/gearbox, if fitted.
Other AUDI procedures
- Removing and installing toothed belt – Audi · 56 torque figures
- Removing engine – Audi A8 D3 · 41 torque figures
- Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
- Installing engine – Audi A8 D4 · 36 torque figures
- Removing and installing camshaft timing chain · 29 torque figures
- Removing air conditioning unit – Audi A3
- Removing and installing air cleaner housing – Audi A6 C5 · 1 torque figures
- Checking injection quantity and spray pattern of injectors; checking for leaks · 1 torque figures
- Direct shift gearbox 02E, four-wheel drive — Exploded view - oil pan, mechatronic unit, gear oil pump · 3 torque figures
- Removing and installing convertible roof – Audi A3
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.