P1987 — Restriction by brake temperature

P1987 means: Restriction by brake temperature. That is the standard definition — what actually triggered it on a given car depends on the engine.

Code family

P1xxx is manufacturer-specific code (VW/Audi, BMW, Mercedes, Toyota etc. have different meanings for the same code number).

Severity

Manufacturer-specific codes need a brand scanner (VCDS for VAG, INPA for BMW, STAR for Mercedes).

General steps

These apply to most OBD codes and are the right starting point before replacing anything. They are not specific to this code — for that, ask me about your car below.

1. Read ALL codes, not just this one — other active codes often give a better picture of the real root cause.
2. Clear the code with a scanner and check if it returns after driving. Sometimes it is a one-off glitch.
3. Check freeze frame data — it shows engine state at the moment the code triggered (RPM, temp, speed, load).
4. Visual inspection: vacuum hoses (cracks), electrical connectors (oxidation), air filter, visible leaks.
5. For persistent codes — measure with multimeter and oscilloscope on the sensor/actuator the code points to.
6. Compare sensor readings against OEM specifications for the specific engine.

That is what holds for P1987 in general. From here it depends on your engine — tell me which car it is and what it does, and I will give you the steps for it: real procedures, torque figures and diagrams instead of general advice.