P07AF — Transmission Friction Element G Stuck On

P07AF is stored when the ECU sees stuck or jammed on transmission. That describes how the circuit is behaving, not which part has failed — the wiring, the connector and the component itself can all produce it, which is why the checks below start with the cheapest.

Common causes

The cause is almost always one of a few things. Here they are — P07AF rarely comes from anything outside this list:

• Carbon or oil deposits binding the mechanism
• Actuator motor or solenoid failed
• Linkage worn or seized
• Control side working correctly but the part cannot physically move

Where to start

In the order a sensible mechanic would work — the cheap checks first, the expensive replacements only after:

1. Command the actuator with a scanner and watch whether it moves at all
2. Remove and inspect for deposits — cleaning frequently fixes this class outright
3. Check the electrical side is delivering the command before condemning the mechanism
4. Inspect the linkage for wear or seizure
5. Replace the actuator if it will not move under command with good supply

That is what holds for P07AF in general. From here it depends on your engine — tell me which car it is and what it does, and I will give you the steps for it: real procedures, torque figures and diagrams instead of general advice.