TorqFix
B1152 Body

B1152 — meaning by make (4 makes)

Documented by: CHEVROLET (USA), FORD, HONDA, MAZDA — the meaning can differ between manufacturers

I got fault code B1152. What does it mean?

B1152 does not mean the same thing on every car — manufacturers reuse the number for different faults. 4 makes document it: Chevrolet (USA), Ford, Honda, Mazda. Find your make below.

MakeDocumented meaningPoints at
Chevrolet (USA)Data area full
FordRadio frequency AM/FM signal key select output, short circuit to positiveimmobiliser / key · short to positive
MazdaRadio frequency AM/FM signal key select output, short circuit to positiveimmobiliser / key · short to positive
HondaGauge control module EEPROMcontrol module
What does B1152 mean on a Chevrolet (USA)?

B1152 on Chevrolet (USA)

On Chevrolet (USA) vehicles B1152 is documented as: Data area full.

Related Chevrolet (USA) codes:

What does B1152 mean on a Ford?

B1152 on Ford, Mazda

On Ford, Mazda vehicles B1152 is documented as: Radio frequency AM/FM signal key select output, short circuit to positive. B1152 is stored when the ECU sees short to positive on immobiliser / key. That describes how the circuit is behaving, not which part has failed — the wiring, the connector and the component itself can all produce it.

Related Ford, Mazda codes:

What does B1152 mean on a Honda?

B1152 on Honda

On Honda vehicles B1152 is documented as: Gauge control module EEPROM. B1152 points at control module. The standard definition names the system involved, not which part inside it has failed.

Related Honda codes:

How do I know which one applies to my car?

Which one is yours

A generic OBD reader gives you the number, not which of these meanings your manufacturer assigned to it. To get to the specific one:

  1. Use a brand-specific scanner — VCDS for VAG, INPA or ISTA for BMW, XENTRY for Mercedes, Forscan for Ford. It shows the manufacturer's own text rather than the generic one.
  2. Read all stored codes together — the neighbouring ones usually point at which system is involved and narrow the list.
  3. Check freeze-frame data: the RPM, temperature and load at the moment it triggered indicate which system was active.
  4. If you have no brand scanner, tell me the make and model below and I will tell you which of these applies to your car.
What kind of code is B1xxx?

Code family

B1xxx is body systems, manufacturer-specific.

And on my car specifically?

That is what holds for B1152 in general. From here it depends on your engine — tell me which car it is and what it does, and I will give you the steps for it: real procedures, torque figures and diagrams instead of general advice.

Free for registered users · 4 questions per day · drawings are Pro · no card

Why TorqFix for your car?

Above is what the code means and why it appears. TorqFix goes further — it gives you specific procedures, torque values, wiring diagrams and pinouts for your exact engine, not generic steps for every car. Real workshop data (127,000+ diagrams, 10,000+ procedures), interpreted by AI in your language.

Free with an account: 4 questions per day · drawings are Pro. Signing up takes twenty seconds and needs no card.

Code breakdown

B
Body
1
Manufacturer
1
Sub-system
52
Specific fault

Related codes

Other codes in the same range:

B1148B1149B1150B1151B1153B1154B1155B1156
Diagnose your car with AI →

Who makes these pages, and how

TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.

The code meanings come from the SAE/ISO definitions and from what each manufacturer documents for the same code, shown by make. The notes on causes and checks are general guidance built from the code family, not a factory test plan for your car.

The same code can mean different things on different makes. Match the meaning to your make before acting on it.

Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com

The story behind TorqFix → · How these pages are made →